Wulf Mods Fang 2-in-1 Vaporizer

Take A Sip Of The High Life

Take a seat and take a sip because the Wulf Mods Fang 2-in-1 Vaporizer is known to blow minds with its down right ferocious dabs! The way this magical glass cup works is that you load either your wax or oil cartridge into it, choose one of 4 voltages (2.5, 3.0, 3.5, 4.0v), and press go to watch as the Fang’s glass fills with as much dab vapor as you can handle!

The Fang is compatible with all waxes and 510 compatible cartridges, letting you use its 1,600mAh battery, choice of 4 voltage settings (2.5, 3.0, 3.5, 4.0v), and utterly unique faux cloud drinking with all your favorite dabbing materials! For added ease of use the Fang has an LED indicator, single button operation, and quick type-c charging to make sure your sessions are as smooth as can be.

How To Load Concentrates

Start by removing the glass top from the base of the Fang and placing it somewhere safe. Next attach the included Atomizer to the threads on the base of the Fang, before loading it with your desired amount of waxy materials. Replace the Glass Top and you are ready to dab!

Never fully load the Fang, a small amount of wax goes a long way and if you put in too much you will risk flooding the chamber.

How To Load Cartridges

To load your cartridges into the Fang, start by removing the glass top and placing it somewhere safe. Then twist your desired 510 cartridge into the threads of the Fang until it is snug.

Once completed, place the Glass Top back onto the base of your Fang and get to enjoying your luscious Wulf Mods cartridge clouds!

Using Your Fang 2-in-1 Vaporizer

To begin your sessions click the power button 5 times in a row to power on the Fang. Now choose between either Manual Mode or Auto Mode and watch as your glass fills with vapor!

To use Manual Mode just hold down the power button and release it when you see enough vapor in the glass!

For Auto Mode press the power button 2 times in succession. This will start heating your materials and fill your Fang with vapor until you press the power button once more to spot it.

Adjusting Temperatures On The Fang 2-in-1 Vaporizer

The Fang comes with a selection of 4 different voltage settings - 2.5v, 3.0v, 3.5v, 4.0v - to give you a wide variety of different temperature experiences.

To change between the temperatures press the power button 3 times in a row. This will cause the Fang to move to the next voltage in line and change the temperature.

How To Charge The Fang 2-in-1 Vaporizer

To charge your Fang Vaporizer make use of the included USB-C cable. When plugged in your Fang will shine a Red light until it is fully charged, at this point it will switch to Green light to let you know it is ready to be used.

The first time you charge your device make sure to leave it connected for 1.5 - 2 hours. After the initial charge, never leave your Fang plugged in for longer than 2 hours to avoid damage and preserve the lifespan of the battery.

Troubleshooting Your Fang 2-in-1 Vaporizer

To make sure our Wulf Mods pack is always safe, make sure you are aware of the following troubleshooting alerts to keep your sessions rolling smoothly.

Auto Shut Off Warning - The Fang’s LED will flash and stop heating if the power button is pressed and held for more than a duration of 30 seconds.

No Cartridge / Atomizer Warning - The Fang’s LED will flash 5x times in a row to let you know the cartridge or atomizer is not currently detected.

How To Clean The Fang 2-in-1 Vaporizer

To clean your Fang’s Glass Top, always make sure to first remove it from the base. Once separated, wash the Glass with a 99% isopropyl alcohol before rinsing with water. Gently shake the water free and stop to leave time for drying before using your Fang again.

For the Fang Base we recommend using alcohol soaked swabs in order to make sure the chamber, 510 threaded connection, and other connections are clean.

What’s Included:

• (1) Wulf Mods Fang 2-in-1 Vaporizer
• (1) Ceramic Atomizer
• (1) Glass Bubbler
• (1) Cleaning Brush
• (1) Pick Tool
• (5) Q-Tips
• (1) Type-C Cable
• (1) User Manual

WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge or use any other charging cable other than what comes with your battery. Failure to follow these instructions could result in battery damage and frying of the internal system.